13
In the field of "Motor name that the target devices belong to", set the motor name to which the
target device belongs.
The initial value is MotorName.
Precautions for Correct Use
• It is not possible to register the same type of device in the same motor (device group) name.
• Up to 3 devices can be registered in the same motor (device group) name.
14
Click the [OK] Button.The following [Navigating is completed] wizard screen is displayed.
Continue to configure other devices
Turn ON the checkbox "Possible to continue the setting of another device"
15
Click the [End] Button.
The Device Connection wizard screen of the following [Start Navigation] Dialog Box is displayed
as in step 5.
16
Connect the Motor condition monitoring Tool directly to the other form K6CM one to one.
17
Perform the same operation as Step 8 and the following.
K6CM Motor Condition Monitoring Device User's Manual (N219)
5 Setting with the Motor condition monitoring Tool
5
5 - 43