Installation Procedures - Omron K6CM User Manual

5-2-2

Installation Procedures

This section shows the procedure for installing a new Motor condition monitoring Tool.
Precautions for Correct Use
"User account control" may be displayed depending on computer settings during installation
procedure. In that case, click "yes" if there is no problem.
1
Insert the attached CD in the computer and select "setup.exe" from the autoplay screen.
If automatic playback was not done, double-click the "setup.exe" file under the CD drive.
The following [Select language setting] Dialog Box will be displayed.
Precautions for Correct Use
If the following message is displayed, the old version of CX-Compolet/SYSMAC Gateway has
already been installed on the computer. In order to use Motor condition monitoring Tool,
upgrade of CX-Compolet/SYSMAC Gateway is necessary.
Please read "3.5. Upgrade installation" of "CX-Compolet_SGW_InstallationGuide_E.pdf" in the
Manual folder on the CD and uninstall the CX-Compolet/SYSMAC Gateway after backing up the
data. Then re-perform step 1.
K6CM Motor Condition Monitoring Device User's Manual (N219)
5 Setting with the Motor condition monitoring Tool
5
5 - 13