Install The K6Cm Devices; Precautions At Installation; Installing The K6Cm Device - Omron K6CM User Manual

4-2

Install the K6CM Devices

This section describes the installation of the K6CM devices.
4-2-1

Precautions at installation

Refer to the Precautions for Safe Use on page 7.
4-2-2

Installing the K6CM Device

For installation of the K6CM device, it is possible to install it on the DIN rail or install it with screws on
the wall.
When installing on DIN Track
Screw the DIN Track in three or more places in a control cabinet.
 Recommended DIN Track
 PFP-M End plate (2 pieces)
 Installation Direction
There is no particular restriction on the mounting direction of the K6CM device, but install it securely
in the horizontal or vertical direction as much as possible.
K6CM Motor Condition Monitoring Device User's Manual (N219)
4 Installation and Wiring
Model Dimensions
PFP-100N 1,000 mm
PFP-50N 500 mm
4
Manufacturer
OMRON
4 - 5