Settings; Alarm Setting Values (Threshold Value) - Omron K6CM User Manual

6-2

Settings

In this section, the setting values in the internal data of the K6CM devices are classified according to
K6CM common and monitor type, and are shown in a list.
Precautions for Correct Use
In order to validate the setting value, it is necessary to turn the power supply ON again or per-
form a soft reset after changing the set value.
6-2-1

Alarm Setting Values (threshold value)

Vibration & temperature Type (K6CM-VBM)
Data name
Acceleration, High alarm threshold
(Critical and Warning)
Velocity, High alarm threshold (Critical
and Warning)
Motor temperature, High alarm
threshold (Critical and Warning)
Temperature Gap, High alarm thresh-
old (Critical and Warning)
Insulation Resistance Type (K6CM-ISM)
Data name
Insulation resistance, Low alarm
threshold (Critical and Warning)
Comprehensive Current Diagnosis Type (K6CM-CIM)
Data name
Degradation level, Low alarm
threshold (Critical and Warning)
Current, High alarm threshold
(Critical and Warning)
K6CM Motor Condition Monitoring Device User's Manual (N219)
6 Internal Data List of the K6CM Devices
Description
Motor condition
monitoring Tool
0.00 to 9.99 G
0.00 to 45.00 mm/s
0 to 80°C
0 to 80°C
Description
Motor condition
monitoring Tool
0.000 to 1.000 MΩ
Description
0 to 999
Current range = 0: 0.00 to 5.00 A
Current range = 1: 0.0 to 25.0 A
Current range = 2: 0.0 to 100.0 A
Current range = 3: 0.0 to 200.0 A
Current range = 4: 0.0 to 400.0 A
Current range = 5: 0.0 to 600.0 A
Writing method (Yes: supported, No: supported)
CIP message
communications
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Writing method (Yes: supported, No: supported)
CIP message
communications
Yes Yes
Writing method (Yes: supported, No: supported)
Motor condition CIP message
monitoring Tool communications
Yes Yes
Yes Yes
Tag data link
No
No
No 6
No
Tag data link
No
Tag data link
No
No
6 - 3