Omron K6CM User Manual page 188

8 Monitoring and Setting with the EtherNet/IP
Attri- Parameter
bute ID name
69 hex Trigger level
6A hex Monitoring
time
6B hex Alarm latch
6C hex Use Running
Time
6D hex Moving aver-
age times
 Vibration & temperature type (K6CM-VBM)
Attri- Parameter
bute ID name
6E hex Temperature
unit
6F hex Reserved.
70 hex Reserved.
71 hex Acceleration
alarm (Warn-
ing)
72 hex Acceleration
alarm (Critical)
73 hex Velocity alarm
(Warning)
8 - 16
Description
Sets the trigger level.
Note : Unit and decimal point position
follow measured values.
Sets the monitoring time.
0.1 to 600.0 (unit: second)
Sets enable/disable of alarm latch func-
tion.
0: Disable (no latch)
1: Enable (with latch)
Sets the usage or nonuse of K6CM
remaining capacity function.
0: OFF (not used)
1: ON (use)
Every time the measured value is sam-
pled, the data of the past n times including
the sampling data of that time is averaged.
0: OFF
1: 2 times
2: 4 times
3: 8 times
4: 16 times
5: 32 times
Description
Sets the temperature unit.
0: °C
1: °F
Reserved.
Reserved.
Sets the acceleration alarm threshold
(Warning).
0 to 9999
The decimal point position follows each
input.
Sets the acceleration alarm threshold
(Critical).
0 to 9999
The decimal point position follows each
input.
Sets the velocity alarm threshold (Warn-
ing).
0 to 9999
The decimal point position follows each
input.
K6CM Motor Condition Monitoring Device User's Manual (N219)
Data
Attri-
bute
Data type Default value
Write UINT 0
Write UINT 0.1
(Unit: seconds)
Write UINT 1
Write UINT 0
Write UINT Vibration &
temperature
type, Insulation
resistance type:
0
Comprehen-
sive current
diagnosis type:
3
Data
Attri-
bute Data type Default value
Write UINT 0
Write UINT 0
Write UINT 0
Write UINT 0.50
(Unit: G)
Write UINT 1.00
(Unit: G)
Write UINT 40.00
(Unit: mm/s)