Omron K6CM User Manual page 8

Safety Precautions
Conformance to Safety Standards
• Reinforced insulation is provided between input power supply, output, and between other termi-
nals.
• To install a recommended fuse for this product according to the instruction manual is necessary.
• If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
• Connect the wiring of ZCT (IRT) to the terminal block corresponding to the thickness of AWG 18
or more.
• K6CM must be installed within a control panel as an embedded device, if using as a UL certified
product.
Conformance to EN/IEC Standards
This is a class A product. In residential areas it may cause radio interference, in which case the
user may be required to take adequate measures to reduce interference.
6
K6CM Motor Condition Monitoring Device User's Manual (N219)