Omron K6CM User Manual page 104

5 Setting with the Motor condition monitoring Tool
 Details of the file to be created
File type
Project file .k6cm
Parameter data .k6pa
file
Log file .csv
5 - 4
Exten-
sion
Binary file including
• Device configuration information including motor group
• Device setting value
• Event log information
• Related log file information
Binary file of parameter values for each device
Automatic log file of monitored information.
It is used for graph display inside the tool.
It is CSV format, so it can be used by other applications.
Note : Depending on the amount (size) of acquired data, it may
be divided and saved.
File name: Project name _IIIIII_TT_YYYYMMDD_NNNN.csv
IIIIII: Device ID (000000 to 999999)
TT: Monitor type (00 to 07)
00: acceleration, 01: velocity, 02: motor temperature,
03: temperature gap, 04: insulation resistance, 05 degradation
level, 06: current
YYYY: Year
MM: Month (01 - 12)
DD: days (01 to 31)
NNNN: Serial number (the above-mentioned device ID, moni-
toring category, number for identifying the same date
year / month / date)
The contents of the file are as follows. One record consists of the
following two lines.
Line 1: [Device name], [Monitor type name]
From the second line: [Date and time], [Current value], [Thresh-
old (Warning)], [Threshold (Critical)], [K6CM status], [Measure-
ment status]
• Device name:
Any one of "K6CM_VB", "K6CM_IS", "K6CM_CI"
• Monitor type name?
Any one of "acceleration", "velocity", "motor temperature",
"temperature gap", "insulation resistance", "current", "degree
of degradation"
• Date and time:
A character string representing the date and time on the com-
puter system when monitoring
• Current value, threshold (Warning), threshold (Critical):
Monitoring form Character string expressing the current value,
threshold value (Warning), threshold value (Critical) of K6CM
device in decimal number with decimal point
• K6CM status, measurement status:
Monitoring form Character string in hexadecimal representa-
tion of each of the 16 bits of the K6CM status and measure-
ment status of the K6CM device
Generated timing:
When saving the project.
One of the following:
• When you press the Save Project button
• When you select to save log files and project files at the end
of the tool
Note : The log file is updated only when the project is saved.
Description
K6CM Motor Condition Monitoring Device User's Manual (N219)
Save position by default
C: \ OMRON \ Motor condi-
tion monitoring Tool
Same as above
Directly under the folder of
the project file name | folder
of the motor name