Omron K6CM User Manual page 92

4 Installation and Wiring
Note 1. Make sure that the outer diameter of the wire coating is smaller than the inner diameter of the insula-
tion sleeve of the recommended ferrule.
2. Make sure that the ferrule processing dimensions conform to the following figures.
Recommended Flat-blade Screwdriver
Use a flat-blade screwdriver to connect and remove wires.
Use the following flat-blade screwdriver.
Side
0.4 mm
Model
ESD0.40×2.5
SZS 0,4×2,5
*1
SZF 0-0.4×2.5
0.4×2.5×75 302
AEF.2,5×75
210-719
SDI 0.4×2.5×75
*1. OMRON's exclusive purchase model XW4Z-00B is available to order as SZF
0-0.4 x 2.5 (manufactured by Phoenix Contact).
4 - 18
1.9 mm max.
Front
2.5
mm dia.
2.5 mm
Wera
Phoenix Contact
Wiha
Facom
Wago
Weidmuller
8 to 10 mm
2.6 mm max.
Manufacturer
K6CM Motor Condition Monitoring Device User's Manual (N219)