Omron K6CM User Manual page 70

3 Mechanism of Measuring and Monitoring of the K6CM Devices
 Example of Operation When the Trigger Mode Is "External Trigger Input" or
"Internal Trigger"
Measured value
Numeric LCD
display
Status display
Automatic
logging by tool
3 - 18
Measurement and monitoring period
Power ON
(*1)
Measuring
and monitoring
Measuring and During measuring
monitoring Not yet and monitoring
Either the current value,
the minimum value, or
"- - - -"
the maximum value of
the measured value
Not lit.
With logging With logging
*1.In the above figure, the power-ON state and the unmeasured state (i.e., the state until
the measured value is calculated) that exist immediately after turning ON the power
as shown on page 3-5 are omitted.
Power ON the next time
After measuring
and monitoring
The status at the
end keeps.
"MON" Not lit.
With logging
K6CM Motor Condition Monitoring Device User's Manual (N219)
Time
Measuring and
monitoring, Not yet
"- - - -"
Not lit.
With logging