Omron K6CM User Manual page 192

8 Monitoring and Setting with the EtherNet/IP
 Instance Attribute ID
The instance attribute ID specifies the per-instance attribute.
Attri-
Parameter name
bute ID
01 hex Vendor ID
02 hex Device Type
03 hex Product Code
04 hex Revision
Major Revision
Minor Revision
05 hex Status
06 hex Serial Number
07 hex Product Name
*1. Product Codes
Model
K6CM-VBM-EIP
K6CM-ISM-EIP
K6CM-CIM-EIP
*2. Status of the EtherNet/IP Port
Bit
0 Owned
1 Reserved.
2 Configured
3 Reserved.
4 to 7 Extended Device Status
8 Minor Recoverable Fault
9 Minor Unrecoverable Fault
10 Major Recoverable Fault
11 Major Unrecoverable Fault
12 to 15 Reserved.
8 - 20
Description
Vendor ID
Device type
Product code
Device revision
Major revision
Minor revision
Status of the built-in Ether-
Net/IP port
For details, refer to "Status of
the EtherNet/IP Port".
Serial number
Product name
Product Code
508
509
511
Name
Indicates when the built-in EtherNet/IP port has an open connection as the target
of a tag data link.
Always FALSE.
Tag data link settings exist.
Always FALSE.
Indicates the status of the built-in EtherNet/IP port.
0: Not used
1: Not used
2: One or more I/O connection failures
3: I/O connection is not established
4: Not used
5: Serious defect occurred (MS Criticality)
6: One or more I/O connections are established and one or more are in the RUN
state
7: One or more I/O connections are established and all are idle
8 to 15: Unused
Always FALSE.
Always FALSE.
When the MS indicator matches conditions of the flashing red: True
When the MS indicator matches conditions of the flashing red: True
Always FALSE.
Attri-
bute Data type
Read UINT
Read UINT
Read UINT
Read Struct of
Read USINT
Read USINT
Read WORD
*2
Read UDINT
Read SHORT_S
TRING
Description
K6CM Motor Condition Monitoring Device User's Manual (N219)
Data
Default value
002F hex
0303 hex
For details, refer to
*1
"Product Codes".
- - -
Product specific
Product specific
- - -
Product specific
Product specific
For details, refer to
*1
"Product Codes".