Omron K6CM User Manual page 176

8 Monitoring and Setting with the EtherNet/IP
Connection assignment dialog to K6CM
3
Download the connections that were set to the PLC.
Tag data link communications are automatically started.
4
Confirm each LED of the PLC and the K6CM devices, and status information in the [Device
Monitor] Dialog Box of the Network Configurator.
8 - 4
PLC side tag set
Input tag set
PLC
Create a tag that matches the size of the
internal data of type K6CM 44 bytes
(common to all models), and sets it as the
input tag set as it is.
Select the 44-byte tag set
you created
K6CM side tag set
Output tag set
Leave the output tag set name
"Input_100 - [44 Bytes]" displayed.
K6CM Motor Condition Monitoring Device User's Manual (N219)
This size is 44 bytes
(common to all models).
K6CM