5 Setting with the Motor condition monitoring Tool
Event log display
You can display the following [Event log list] by pressing the
lower right of each device's detail status screen.
You can check the occurrence history of individual alarms of the currently displayed device.
Device setting screen
On the monitoring screen, click the
Device setting screen is displayed.
Device setting screen
Motor name
Device Type
5 - 28
[Device setting] Button. The following device setting screen
Monitoring/
Parameter name
Monitoring stopped
K6CM Motor Condition Monitoring Device User's Manual (N219)
[Event log display] Button at the
Value, unit
Switch between
[Monitoring by
motor category]
and [Monitoring
by monitoring
category]
Software reset button