Omron K6CM User Manual page 32

1 Overview
Item
Communic- Communica-
aitons tions protocol
Physical
layer
Ambient operating tem-
perature
humidity
Storage ambient tempera-
ture
Storage humidity
Altitude
Recommended fuse (input)
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Warranty period
Terminal type
Exterior color
Applicable standards
Mounting
Weight
1 - 12
EtherNet/IP
Ethernet: Connector RJ45
-10 to 55 ° C (with no condensation or freezing)
25 to 85% RH (with no condensation)
-20 to 65 ° C (with no condensation or freezing)
25 to 85% RH (with no condensation)
2,000 m or less
UL R/C, CSA Component Acceptance, FIH250V2A, NIPPON SEISEN CABLE LTD
20 MΩ min.
Between all external terminals and the case
Between all power supply terminals and all other terminals
Between all sensor connection terminals and trigger input terminal + output terminal + all Ether-
Net/IP ports
2,000 VAC for 1 minute
Between all external terminals and the case
Between all power supply terminals and all other terminals
Between all sensor connection terminals and trigger input terminal + output terminal + all Ether-
Net/IP ports
Frequency: 10 to 55 Hz, 0.35-mm single amplitude, acceleration 50 m/s
10 sweeps of 5 min each in X,Y, and Z directions
2
100 m/s , 3 times each in X, Y, and Z axes, 6 directions
IP20
1 year
Push-In Plus
Black (Munsell N 1.5)
Compliance standard:
EN 61010-2-030
Installation environment: overvoltage category II, measurement category II (CAT II CT input,
ZCT (IRT) input), pollution degree 2 (according to EN 61010-030)
EMC: EN 61326 - 1 (EMI: Class A EMS: Indutrial Location)
Acceleration: ± 0.09 G, temperature: ± 6°C, insulation resistance: ± 50% rdg, current: ± 10% F. S.
Safety standards: UL 61010-2-030 (Listing), Korean Radio Law (Law No. 10564), RCM
DIN Rail mounting, or screw mounting
Approx. 200 g
K6CM Motor Condition Monitoring Device User's Manual (N219)
Specifications
2