Omron K6CM User Manual page 39

4. Monitoring
and operation
5. Troubleshoot
K6CM Motor Condition Monitoring Device User's Manual (N219)
Start measuring using the K6CMs.
Record measurement values from the host system (i.e., the
Motor condition monitoring Tool, PC, or PLC) to estimate an
alarm set value to be used as the monitoring standard.
• With the Motor condition monitoring Tool, set the "Monitor-
ing cycle" by pressing the [Option] Button, before monitor
via EtherNet/IP and log the measurement values.
• With PC or PLC, Monitor via EtherNet/IP and log the mea-
surement values.
Estimate an alarm set values to be used as monitoring stan-
dard, considering the relationship between the change in
each measurement value and the fatal state of the motor.
Determine the alarm set values as the monitoring standard
based on the monitoring and operation results.
Change the setting of the alarm set values and make main
monitoring and operation.
Troubleshoot
↓
↓
↓
↓
▼
1 Overview
Section 3 Mechanism
of Measuring and Mon-
itoring of the K6CM
Devices
Section 7 Motor Moni-
toring and Operation
with the K6CM Devices
and the Motor condi-
tion monitoring Tool
Section 8 Monitoring
and Setting with the
EtherNet/IP
Section 9 Trouble
shooting
1 - 19
1