Figure 2-4. Stacking Adapter And Base Rack With Stacking Elements; Figure 2-5. Fastening The Adapter Plate To The Lower Unit - Thermo Scientific STERI-CYCLE i160 User Manual

S
TERI-CYCLE
1. Place the lower unit with the device stands
on top of the mobile base rack
2

Figure 2-4. Stacking adapter and base rack with stacking elements

2. Place bottom of adapter plate
3. On both sides, align the bores in the connecting tab
(7/Figure

Figure 2-5. Fastening the adapter plate to the lower unit

4. Use the fastening screws supplied to bolt the adapter plate
lower unit
5. Fasten adapter plate
6. Place the device to be stacked with the device stands
(1/Figure
Thermo Scientific
i160 and S
i250:
TERI-CYCLE
(2/Figure
(7/Figure
2-5) with the bores in the rear wall of the lower unit
9
(8/Figure 2-5).
(7/Figure 2-5) to the opposite corner of the unit using two screws.
2-4) at the top of the adapter plate.
(3/Figure 2-4) on the stacking elements
2-4).
3
1
2-5) on the top panel of the lower unit
(9/Figure
6
7
8
(7/Figure
(6/Figure
2
Installation of the device
(1/Figure 2-4
(8/Figure
2-5) of the adapter plate
(8/Figure 2-5).
2-5) to the rear wall of the
2-5) onto the stacking elements
i160 / i250
S
TERI-CYCLE
Stacking
2-5.
2-5