6
Handling and control
User configuration
Figure 6-31. Event logging menu
Event display
The event display uses short, single-line entries specifying date and time to report the events that were
logged during the operation of the device.
The entries are listed in chronological order with the most recent event at the top position. The list can
be displayed but not edited. If the event display consists of several pages, the user can browse through
the list. The status indicator indicates which page of the total number of pages is currently being
displayed.
Invoking the event log
1. Press the Menu key.
2. Select the menu command Event logging.
• The selection dialog shown in
3. Select the menu command Event display.
• The list shown in
Figure 6-32. Event display
i160 / i250
S
6-28
TERI-CYCLE
Figure 6-31
Figure 6-32
appears on the display.
is displayed.
Thermo Scientific