Figure 6-11. O
2. To exit the O
• Press the End key.
3. To set the O
• Press the Set value key.
To increase the set value:
• Press the + key.
To reduce the set value:
• Press the - key.
4. To accept and save the set value:
• Press the Enter key.
• The system returns to the main menu. The O
in the workspace.
Figure 6-12. Setting the O
Thermo Scientific
display and O
menu
2
2
menu:
2
set value:
2
set value
2
display shows the actual value currently measured
2
S
TERI-CYCLE
6
Handling and control
Setting the O2 set value
i160 / i250
6-11