Thermo Scientific STERI-CYCLE i160 User Manual page 130

7
Shut-down
Shutting the device down
8. Turn the device off using the power switch when the steri-run decontamination routine has been
completed.
9. Unplug the power connector and protect it against accidental reconnection.
10. Close shut-off valves of the CO
11. Disconnect the gas pressure hoses from the sleeve at the rear of the device.
12. Until the device is shut down, the workspace must be continuously ventilated. Leave the glass door
and the outer door open and secure them in this state.
i160 / i250
S
7-2 TERI-CYCLE
/O /N supply system.
2 2 2
Thermo Scientific