Figure 6-26. Interface Usb Menu; Figure 6-27. Usb Interface Baud Rate Setting - Thermo Scientific STERI-CYCLE i160 User Manual

6
Handling and control
User configuration

Figure 6-26. Interface USB menu

3. Select the option Interface USB
• The input dialog shown in

Figure 6-27. USB interface baud rate setting

4. Press the + or key to set the Baud rate of the USB interface
• To increase the baud rate: Press the + key.
• To reduce the baud rate: Press the - key.
5. The value change appears in the display. The New message indicates that the selection has been
changed, but not saved yet.
6. To accept and save the change:
• Press the Enter key.
• The display returns to Interface USB selection menu.
7. To activate the new settings:
• Browse back to the main menu.
• Wait for approx. 10 seconds and perform a reset by switching the device off and on using the
power switch.
i160 / i250
S
6-24 TERI-CYCLE
(Figure 6-26).
Figure 6-27 is displayed.
(Figure 6-27).
Thermo Scientific