6
Handling and control
Error messages
Figure 6-51. Event error messages
Resetting overtemperature protection
When the controller of the unit has activated overtemperature protection and switched over to
emergency control mode, the main menu is overlaid by a flashing warning triangle and the pertinent
icon.
Figure 6-52. Failure message Overtemperature
1. Displaying the cause of an error:
• Press anywhere on the touchscreen.
• The Error dialog box appears and the detected error is displayed.
• The audible alarm is switched off.
i160 / i250
S
6-46
TERI-CYCLE
Thermo Scientific