Figure 3-13. Water Reservoir; Figure 3-14. Drain Valve Of Water Reservoir - Thermo Scientific STERI-CYCLE i160 User Manual

3
Description of the device
Workspace Components
1, 2
3
4

Figure 3-13. Water reservoir

The water reservoir is monitored by the water level sensor described in section
page 3-11.
A fill level indicator with the punched-out word "MAX" (1/
reservoir to indicate the maximum fill level. The maximum fill volume of the water reservoir is 3 liters.
In order to minimize interference to the workspace atmosphere during water replacement without
disruption of incubation operation, the unit has a front-side quick-drain valve. Plugging the drain tube
supplied into the front-side quick-drain valve starts draining immediately.

Figure 3-14. Drain valve of water reservoir

i160 / i250
S
3-20 TERI-CYCLE
2 1
2
Figure 3-13) is suspended above the water
"Sensor system" on
Thermo Scientific