Figure 6-25. Adjusting Key Tone Volume - Thermo Scientific STERI-CYCLE i160 User Manual

Figure 6-25. Adjusting key tone volume

1. To increase the value:
• Press the + key.
2. To reduce the value:
• Press the - key.
3. The value change appears in the display. The New message indicates that the selection has been
changed, but not saved yet.
4. To accept and save the change:
• Press the Enter key.
• The system returns to the Settings/Setup menu.
USB interface baud rate setting
This selection menu allows for adjusting the data rate of the USB interface:
The baud rate can be changed within the defined baud rates (9,600, 19,200, 38,400, 57,600 baud).
Setting the baud rate
1. Press the Menu key.
2. Select the menu command Settings / Setup.
• The selection dialog shown in
Thermo Scientific
Figure 6-26 is displayed.
6
Handling and control
User configuration
i160 / i250
S
TERI-CYCLE 6-23