Mount The Split Inserts (Optional) Into The Steri-Cycle I250; Figure 4-9. Installation Of Split Inserts - Thermo Scientific STERI-CYCLE i160 User Manual

2. Rotate the adjustable device stands using the supplied 24 mm (0.94 inch) wrench until the shelf is
positioned horizontally in all directions. Perform the height adjustment of the device stands from
left to right and from rear to front.
Mount the split inserts (optional) into the S
3
2
1

Figure 4-9. Installation of split inserts

For a S
TERI-CYCLE
support frames with two shelves each are placed onto the shelf supports of the lateral support rails
instead of the one-piece shelves of the standard version.
1. Place both these shelves
2. Suspend the support frame
Thermo Scientific
i250 equipped with an optional six-fold gas screen and 6-segment split inserts, three
(1/Figure 4-9) onto the support frame
(2/Figure 4-9) in the shelf supports

Mount the split inserts (optional) into the STERI-CYCLE i250

TERI-CYCLE
(2/Figure
(3/Figure
4
Start-up
i250
4-9) (step A).
4-9) (step B).
i160 / i250
S
TERI-CYCLE 4-9