4
Start-up
Install the air duct
Install the air duct
1. Join the top part
steps A-E). Make sure, that in step C of
place in the rectangular hole of the bottom part.
2. Place the tab at the bottom of the rear part
duct backwards.
3. Lock the lateral keyholes of the top part (step
workspace ceiling.
E
Figure 4-3. Assembling the air duct
i160 / i250
S
4-4
TERI-CYCLE
(1/Figure
4-3) of the air duct with the rear part
Figure 4-3
B
F
(2/Figure
the positioning tab at the rear part clicks into
(2/Figure
4-3) on the two rear wall studs and tilt the air
G/Figure
4-3) into the retaining screws in the
C
G
4-3) (see
Figure
4-3,
1
2
D
Thermo Scientific