Activating / de-activating the HEPA-filter:
If the unit is to be operated without the built-in HEPA-filter, the latter must be de-activated in the
configuration menu to avoid malfunctions.
Activating / de-activating the HEPA-filter
1. Press the Menu key.
2. Select the menu command Options.
• The selection dialog shown in
3. Select the menu command HEPA.
• The selection dialog shown in
Figure 6-43. HEPA configuration
4. Select the menu command HEPA configuration.
• The input dialog shown in
Figure 6-44. Activating / de-activating the HEPA-filter
1. To toggle between two states:
• Press the + key.
or
Thermo Scientific
Figure 6-35
is displayed.
Figure 6-43
is displayed.
Figure 6-44
is displayed.
6
Handling and control
User configuration
i160 / i250
S
TERI-CYCLE
6-39