Hepa-Filter And Air Duct; Figure 3-4. Hepa-Filter And Airbox - Thermo Scientific STERI-CYCLE i160 User Manual

3
Description of the device
Workspace atmosphere

HEPA-filter and air duct

The air stream from the water reservoir towards the workspace is channeled through a HEPA-filter in
order to minimize the risk of contamination. The filter works with separation rate of 99.998 % for a
particle size of 0.3 µm (HEPA-filter quality).
The HEPA-Filter
airbox rests on the water reservoir cover panel
ç
1
2

Figure 3-4. HEPA-filter and airbox

Instructions for activating the HEPA-filter monitor are given in section
HEPA-filter:"
The air duct feeds the flow of aire from the fan along the rear wall
ceiling, thus ensuring an optimum temperature distribution. At the same time, it directs the incoming
stream of process gases into workspace and ensures that the gases are optimally intermixed.
i160 / i250
S
3-8 TERI-CYCLE
(2/Figure 3-4) must be inserted into the airbox
5
6
7
8
on page 6-39.
(2/Figure 4-5) and is pushed against the air intake.
3
4
(1/Figure 3-4) from below. The
4
CLICK
"Activating / de-activating the
(3/Figure 3-5) to the workspace
Thermo Scientific
3