1
2
Figure 8-2. HEPA-filter and airbox
3. Pull top part the air duct
downward movement when the keyholes in the front-side mounting tabs clear the retaining pins in
the workspace ceiling.
4. Separate the top part from the rear part of the air duct
workspace.
Thermo Scientific
5
6
7
8
(1/Figure
3
4
8-3) towards the front side of the unit, then lift out with a
(2/Figure
8
Cleaning and disinfection
Wipe/spray disinfection
4
CLICK
8-3) and remove it from the
i160 / i250
S
TERI-CYCLE
3
8-5