Figure 6-23. Setting The Time - Thermo Scientific STERI-CYCLE i160 User Manual

Figure 6-23. Setting the time

9. To enter the time:
• Press the numeric keys.
• The input numbers are displayed in the input box.
10. To set the cursor to the left to overwrite a value:
• Press the Backspace (<<) key.
11. To accept and save the input value:
• Press the Enter key.
12. The system returns to the Date/Time menu.
Adjusting display brightness
The selection menu allows for adjusting the brightness of the operating panel over a range from
1 to 100 %.
Setting the contrast
1. Press the Menu key.
2. Select the menu command Settings / Setup.
3. Select the option Display contrast.
• The input dialog shown in
Thermo Scientific
Figure 6-24 is displayed.
6
Handling and control
User configuration
i160 / i250
S
TERI-CYCLE 6-21