Figure 6-33. Logging Cycle Setting - Thermo Scientific STERI-CYCLE i160 User Manual

1. To browse forward in the list:
• Press the Continue key.
2. To browse backward in the list:
• Press the Previous key.
3. Exit the display:
• Press the End key [3].
• The system returns to the Event logging menu.
Changing the logging cycle time:
Due to limited memory resources, the oldest entries are deleted as new entries are logged. The period
from which the displayed entries originate depends largely on the selected logging cycle time.
Invoking the event log
1. Press the Menu key.
2. Select the menu command Event logging.
• The selection dialog shown in
3. Select the menu command Recording interval.
• The input dialog shown in

Figure 6-33. Logging cycle setting

Thermo Scientific
Figure 6-31 is displayed.
Figure 6-33 is displayed.
6
Handling and control
User configuration
i160 / i250
S
TERI-CYCLE 6-29