Cancel Steri-Run; Figure 8-6. Activate Steri-Run - Thermo Scientific STERI-CYCLE i160 User Manual

8
Cleaning and disinfection
Steri-run decontamination routine
• Start steri-run.
• The run of the steri-run decontamination routine starts.
• While the steri-run decontamination routine is running, the display shows the current status and
outputs the following information:
• temperature,
• start time,
• phase,
• remaining run time.

Figure 8-6. activate steri-run

cancel steri-run

The steri-run decontamination routine can be interrupted at any time.
1. Cancel steri-run:
• Press the Stop key.
• If the Stop key in the status display is depressed, the steri-run stop dialog box is displayed for a
2. To stop steri-run:
• Press the End key [3].
• The error message is displayed.
• If the error message is confirmed, the system returns to the main menu.
3. To resume steri-run:
• Press the Back key.
• The system returns to the status display, and the decontamination routine is resumed.
4. To interrupt Steri-Run from the status display:
• Press the Stop key.
• As a safety scan, the steri-run - Stop dialog window appears. Proceed with work step 2 (see section
above).
i160 / i250
S
8-10 TERI-CYCLE
safety scan. The routine can now be permanently cancelled or resumed.
Thermo Scientific