Transport; Stacking; Figure 2-2. Lift Points - Thermo Scientific STERI-CYCLE i160 User Manual

Transport

For transport, do not lift the device using the doors or components attached to the device (e.g. control
box on rear panel) as lift points.

Figure 2-2. Lift points

Note Lift points:
Lift the device only using the lift points.
CAUTION Heavy loads! Lift with care!
To avoid injury through physical strain, such as strain traumata and slipped discs, do not attempt to
lift the incubator alone!
To avoid injury through dropped loads, be sure to wear Personal Protection Equipment, such as
safety shoes, when lifting the incubator.
To avoid crushing your fingers or hands (particularly in a closing door) or damaging the incubator, do
not use any other lift points than those indicated in the illustration above.

Stacking

S
TERI-CYCLE
is accomplished by placing an optional stacking adapter
As an option, a mobile base rack
rollers of the base rack are fitted with a locking brake.
Note
when installing the stacking adapter and stacking the units, follow the assembly instructions
delivered with the stacking adapter.
Thermo Scientific
i160 / S i250 is suited for stacking up to two devices of the same device type. This
TERI-CYCLE
(2/Figure
(1/Figure 2-3) between the two units.
2-3) is available in order for the units to be movable. The
2
Installation of the device
Transport
i160 / i250
S
TERI-CYCLE 2-3