Completing Steri-Run; Figure 8-8. To Stop Steri-Run - Thermo Scientific STERI-CYCLE i160 User Manual

8
Cleaning and disinfection
Steri-run decontamination routine

Completing steri-run

When all three phases have been completed, the Steri-Run End
displayed automatically. The decontamination routine must be stopped manually.

Figure 8-8. To stop steri-run

• To stop steri-run:
• Press the End key [3].
• The system returns to the main menu.
Note Opening door during contra-con decontamination:
If the door will be opened and closed again whilst contra-con decontamination is running, the
routine returns to a phase which will ensure a continuation without faults.
Note
Risk of burns! Do not open the door under any circumstances!
i160 / i250
S
8-12 TERI-CYCLE
(Figure 8-8) dialog window is
Thermo Scientific