Figure 6-20. Changing The Keypad Lock Code - Thermo Scientific STERI-CYCLE i160 User Manual

4. Confirm your input:
• Press the Enter key.
• The Code new prompt appears in the display. Four blanks indicate that a new key code may be
entered.

Figure 6-20. Changing the keypad lock code

Entering the new 4-digit code:
• Press the corresponding numeric keys.
• The number combination is displayed in the input box.
5. To set the cursor to the left to overwrite a value:
• Press the Backspace (<<) key.
6. To accept and save the input value:
• Press the Enter key.
• The system returns to the Settings/Setup menu.
• A padlock icon appears on the Icon bar in the main menu
indicator for the keypad lock.
Note Changing the user-defined code:
The user-defined code can be changed as often as required using the same procedure:
• Activate the recoding function by entering the valid code,
• enter the new code and confirm it.
Date/time setting
The input dialog allows date and time to be set to the required time zone.
1. Press the Menu key.
2. Select the menu command Date / Time.
• The selection dialog shown in
Thermo Scientific
Figure 6-21 is displayed.
6
Handling and control
User configuration
(Figure 6-2 on page 3) as an activity
i160 / i250
S
TERI-CYCLE 6-19