Thermo Scientific STERI-CYCLE i160 User Manual page 190

12
Annex: Data communication
Program STERI-CYCLE i160 / STERI-CYCLE i250
Function of the user menu:
PRESETTING
The submenu PRESETTING is used to set the transmission speed and to select the serial port.
1. Select a transmission speed within the range of 9,600 to 115,200 baud.
2. Select the serial port of the PC. If the USB driver is installed, the (virtual) Com Port assigned to
the USB port can be selected (see
3. Accept the settings:
• Press the CHANGE key.
4. Save the settings (in an INI file):
• Press the SAVE TO FILE key.
Note Transmission speeds:
The transmission speed settings in the user menu PRESETTING and of the device must be
identical!
i160 / i250
S
12-24 TERI-CYCLE
"USB interface" on page 12-1).
Thermo Scientific