Subscribe to Our Youtube Channel
Related Manuals for Thermo Scientific IMC 18
Summary of Contents for Thermo Scientific IMC 18
- Page 3 Preparing the useable space....................... 5-1 Mains connection ..........................5-1 Preparing the device .......................... 6-1 Starting Operation ..........................6-1 Powering up and down........................7-2 Setting the temperature........................7-2 Interior light............................7-2 Shutting the device down ........................8-1 Thermo Scientific Heratherm IMC 18...
- Page 4 Empty the condensation tray ......................9-1 Cleaning exterior surfaces......................... 9-1 Wipe / spray disinfection........................9-1 Inspections and checks ........................10-1 Overview of materials used......................11-2 WEEE Conformity .......................... 11-2 Heratherm IMC 18 Thermo Scientific...
- Page 6 Indicates a hazardous situation which, if not avoided, will result in death or serious injuries. Indicates a hazardous situation which, if not avoided, could result in death or serious injuries. Indicates a situation which, if not avoided, could result in damage to property.
- Page 7 Is used for useful hints and information regarding the application.
- Page 9 A use of the device which is not intended can be hazardous.
- Page 14 The cooling fan on the back of the device is not to be covered. It is not to suck-in any loose items (e.g. paper).
- Page 19 Electrical shock Contact with live electrical components may cause a lethal electric shock. Before connecting the device to the power supply, check the power cord and the plug for damage. Do not use damaged cables for con- necting the device to the power supply!
- Page 20 Power sockets The socket which the device is connected to is to be fully accessible when operating the device so as to ensure that the plug can be re- moved should danger occur! Condensation The device should be in the room for a sufficiently long duration be- fore it is switched on, in order to ensure that it can reach the ambi- ent temperature.
- Page 21 Proper loading To ensure sufficient air circulation and uniform heating of the sam- ples, do not use more than 70% of the maximum surface area of the useable space. Bulky objects in the useable space that dissipate heat may impair heat distribution.
- Page 25 Contamination hazard If the useable space surfaces are contaminated, germs may spread to the environment of the incubator.
- Page 27 Electrical shock Contact with live electrical components may cause a lethal electric shock. Disconnect the device from the mains before carrying out cleaning and disinfection work! • Switch the device off with button • Remove the plug from the socket and secure it against reconnection.
- Page 28 Incompatible cleaners Some device components are made of plastics. Solvents may at- tack plastics. Strong acids or alkaline solutions may cause embrit- tlement of plastics. Moisture-sensitive components Do not spray cleaning agent onto the display. When wiping over, ensure that no moisture is able to penetrate the display or run behind the door seal.
- Page 29 Health hazard The surfaces of the useable space may be contaminated. Contact with contaminated cleaning liquids may cause infections. Disin- fectants may contain harmful substances. When cleaning and disinfecting, always observe the safety in- structions and hygiene guidelines! • Wear safety gloves. •...
- Page 33 Contamination hazard The device may have been used for treating and processing infec- tious substances, which may have caused contamination of the device and its components. Prior to disposal, it is therefore mandatory that all incubator com- ponents be properly decontaminated! •...
Need help?
Do you have a question about the IMC 18 and is the answer not in the manual?
Questions and answers