The supplied gas pressure hoses feed the gas from the central gas supply system to the device.
Devices with CO
connected according to the connection diagram
CO
connection:
2
For a device that is operated with process gas CO
system, connect the gas supply lines as follows:
• Item
devices. For looping the gas supply through, the devices must be interconnected with a gas pressure
hose.
• Item
system.
• Item
system.
• Items 4 &
the gas inlet filter by a short gas pressure hose (item
Note Looping the gas supply through:
By looping the gas supply through, up to 4 devices can be supplied by a CO
Combined CO
2
(optional)
Figure 4-13. Combined CO
Thermo Scientific
connections that are equipped with the optional gas monitoring system are
2
1/Figure
4-12: Distributor connection for the CO
2/Figure
4-12: Connect the gas container B to the upper connection of the gas monitoring
3/Figure
4-12: Connect the gas container A to the lower connection of the gas monitoring
5/Figure
4-12: The outlet of the gas monitoring system is connected at the factory to
and O
/N
connection with gas monitoring system
2
2
/O
2
(7/Figure
4-12).
and equipped with the optional gas monitoring
2
2
6/Figure
/N
connection with gas monitoring system (optional)
2
2
gas supply for up to three additional
4-12).
gas supply.
2
i160 / i250
S
TERI-CYCLE
4
Start-up
Gas connection
4-13