12 Frequency Offset Using Power Sensor (Fops) - Option - Keysight N9912A User Manual

Keysight Handheld Analyzers
N9912A User's Guide
12 Frequency Offset Using Power Sensor (FOPS) – Option
208
FOPS is accessed through (and requires) Option 302 USB Power Meter Mode.
With both options installed, you can send a signal with the FieldFox internal
source at one frequency, and measure this signal with a Keysight U-Series USB
Power Sensor at another frequency.
Figure 12-1 Display for FOPS
In this Chapter
"Overview" on page 12-3
"Measurement Selection" on page 12-5
"Sweep Type and Frequency" on page 12-6
"Power Sensor Settling" on page 12-8
"Sweep Settings" on page 12-8
12-1