Changing The Videophone Settings - NTT docomo FOMA D703i User Manual

Setting the screen displayed during a call
Default Display setting: Both sides Sub screen: My side Screen size: Large Display light: Always on(normal)
m5 during a call
1
2
Select each item to set
･
For setting each item (Display setting, Sub screen, Screen size and Display light), follow Step 2 in "Changing
the videophone settings".

Changing the videophone settings

Set the operation to be performed when a videophone call is not connected, the screen displayed during
a videophone call, etc.
･
The setting of Auto redial as voice is provided to ensure access to the other party. By setting this function to
ON, a dialed videophone call will be automatically redialed as voice call if the other party's terminal does not
support the videophone function or cannot receive the videophone call while using the mova service through
Dual Network Service. Redialing does not occur, however, if you call an ISDN-sync 64 kbps or PIAFS
access point, or an ISDN videophone incompatible with 3G-324M (as of December 2006), or if you dial the
wrong number. Note that some calls may require the call charge.
Default Auto redial as voice: OFF Display setting: Both sides Sub screen: My side Screen size : Large
Visual preference: Normal Display light: Always on(normal) Speakerphone: ON
m853
1
2
Select each item to set
Auto redial as voice ：Sets whether to redial as voice call automatically when a videophone call is not
：Specifies whether to display either your image (My side) or the other party's image
Display setting
：Specifies whether to display your image (My side) or the other party's image (Other
Sub screen
：Sets the main screen view size.
Screen size
：Sets the quality of image sent from the other party.
Visual preference
：Sets the display light during a videophone call.
Display light
：Specifies whether to turn on the speakerphone function automatically once a
Speakerphone
z Press p
z Press p
connected.
(Other side) or both images during a videophone call.
side) on the sub screen during a videophone call.
･
When Terminal settings is set, the setting of Display light time (Normal use) in
Display Light Setting (☛P116) applies.
videophone call is connected.
Videophone Settings during a call
Calls/Videophone Calls
Videophone Settings
75
Next