NTT docomo FOMA D703i User Manual page 228

Table of Contents

Advertisement

When the memory is not enough, or the maximum
number of saved items is exceeded, the oldest received
mail except unread ones is overwritten. Be sure to
protect received mail you want to keep.
When the mail cannot be overwritten because storage
is filled with unread mail and protected mail, reception
of SMS is stopped.
screen. To receive new messages, you need to display
unread mail, change unread mail to read, delete
unnecessary mail or cancel mail protection.
When the UIM already contains 20 messages, SMS
may not be received even though there is space
available in Inbox.
or
screen. Move messages to FOMA terminal (☛P228) or
delete them from the UIM (☛P228).
In case that a phone number or URL is described in
SMS, a caution appears indicating that the phone
number and URL are described when displaying the
SMS first. To display SMS, press o. You can also set
not to display the caution in Scanning Setting. ☛P378
When the received SMS has been set to be saved
directly to the UIM, it will be saved directly on the UIM.
Note that, when the number of messages in the UIM
reaches 20, SMS cannot be received any more. Delete
unnecessary messages and perform Check SMS again.
The received SMS is saved in Inbox.
Short Mail sent from a mova terminal is received by
FOMA terminal as SMS.
When SMS is received from a party with the incoming
mail settings made in the FOMA terminal phonebook, the
settings apply to the operation of the ring alert, vibrator
and/or the key. For details on checking with the
phonebook, see "Name displays". ☛P80
When multiple items of SMS are received at the same
time, the operation depends on the conditions set for
the last SMS received.
When SMS is received from overseas carriers other than
DoCoMo, "+" is added before the sender address. If the
sender address prefixed with "+" it is registered in the
phonebook, the name in the phonebook is displayed.
Checking for SMS
You can make inquiry for any SMS delivered
while FOMA terminal was out of service area or
turned off.
Operate the terminal in locations with good signal
condition.
Press a62
1
INFORMATION
It may take time to receive SMS with Check SMS.
226
Mail
or
is indicated on the
is indicated on the
Menu 162
Check SMS
Making SMS settings
Usually, you do not need to change SMSC,
Address and Type of Number settings.
Default Font type: Japanese
SMS report request: Not request
Keep in SMS center: 3 days SMSC: DoCoMo
Address: 81903101652
Type of Number: international
a74
1
2
Select each item to set
Font type :
Selects Japanese or English language of
messages to be sent. The maximum number
of characters that can be sent differs
depending on the font type.
SMS report request :
Specifies whether to request a delivered
report when you send SMS.
Keep in SMS center :
Sets the storage period of sent SMS in the
SMS Center in cases the receiver cannot
receive the message.
When 0 day is set, SMS is resend after the
fixed time has passed and deleted from
the SMS Center.
SMSC :
Sets SMSC when you use SMS services
other than DoCoMo.
When Others is set, select the Address field
and enter the address (up to 20 one-byte
characters).
Type of Number :
Selects either international or unknown.
When you select Others for SMSC and
enter only numbers or numbers plus "
or "#" in the Address field, select unknown.
INFORMATION
On the SMS composition screen, press m and select
SMS settings. In this case, only SMS report request and
Keep in SMS center can be set and the settings are valid
only for the SMS being composed.
The settings for Font type, Keep in SMS center, SMSC and
Type of Number are also stored on the UIM.
Menu 174
SMS Setting
z
Press p
"

Advertisement

Table of Contents
loading

Table of Contents