NTT docomo FOMA D703i User Manual page 35

UIM security codes
The PIN1 and PIN2 codes are used for the UIM.
Both codes are set to "0000" at the time of subscription to the FOMA service. You can change this to any code
(4 to 8 digits). ☛P128
UIM operation restriction function
FOMA terminal is provided with the UIM operation restriction function for protecting your data and files.
･
When the data or files downloaded from sites or the data attached to mail are saved in FOMA terminal with
the UIM inserted, the UIM operation restriction is automatically set to these data or files.
･
If the UIM is replaced by another UIM or is removed from FOMA terminal, the data or files with the UIM
operation restriction set cannot be displayed or played, or sent by infrared communication.
･
The data which is subject to the restriction is as follows:
・
File attached to i-mode Mail
・
Image inserted in Deco-mail or signature
・
i- ppli (including the i-
α
・
Image (including animation and Flash movie)
・
Machi-chara
・
Melody
・
Word/Excel/PowerPoint data
・
Mail template containing data which is subject to the operation restriction
・
Recorded message of videophone call
･
For i- ppli with the UIM operation restriction set, if the UIM is replaced by another UIM or is removed from
α
FOMA terminal, only deleting and protecting the i-
INFORMATION
When the data with the UIM operation restriction enabled is set for the standby display, call image or ring alert, if the
●
UIM is replaced by another UIM or is removed from FOMA terminal, the image and sound settings return to the default.
In this case, the image and sound that are actually displayed/generated may differ from the settings. Inserting the UIM
that was used when the data was downloaded cancels the operation restriction and restores the original settings. (Note
that the setting of Random Display Image may be canceled if the data was used for it.)
The UIM operation restriction is not set to the data obtained via infrared communication or the DoCoMo keitai datalink,
●
or to the still images or videos taken with the built-in camera.
When the UIM is inserted in other i-channel compatible terminals, the i-channel information is not displayed as ticker on
●
the standby display. After that, if the information is updated automatically or if you press c on the standby display to
display the channel list, the latest information is received and then displayed as ticker on the standby display.
When the UIM is not inserted, the i-channel information is not displayed as ticker on the standby display.
●
Settings saved into the UIM
The following settings are saved into the UIM. If the UIM is replaced, the settings of the new UIM become
effective.
･
My phone number
･
SMS Setting (except SMS report request)
･
The PIN1/PIN2 code of the UIM and PIN1 Code ON/OFF
ppli standby display)
α
α
･
DoCoMo certificate and user certificate set in Manage Certificate
･
Select Language
・
Screen memo
・
Message R/F
・
i-motion
・
Chara-den
®
・
Chaku-Uta Full
・
PDF data
・
Video memo
ppli are possible.
Before Using D703i 33