NTT docomo FOMA D703i User Manual page 369

●Contains bad data.
i- ppli cannot be started from invalid
α
data read with Bar Code Reader.
●Content length exceeds
maximum size for i-motion.
Reception was suspended because
the data exceeded the maximum
size when downloading the
streaming type i-motion data.
●Content length exceeds
replayable size for i-motion.
Reception was suspended because
the data exceeded the maximum
size when downloading the normal
type i-motion data.
●Continue using i- ppli and
α
transmit data?
The number of transmission is
extremely large within the specified
duration when using i- ppli and
α
i- ppli tried to transmit again after
α
the message Data transmission is
frequent. Continue transmission? was
displayed. Select Yes to use i-
successively, Terminate i-
α
quit i- ppli.
α
●Data damaged. Unable to
view log.
The log cannot be displayed
because the log data of sent or
received mail contains an error.
●Data damaged. Restore
default settings?
The data contains error. Select Yes
to return to the default setting. Mail
cannot be started without restoring
the default setting.
●Data not supported. Unable
to display.
The data cannot be displayed
because it cannot be recognized by
FOMA terminal.
●Data transmission is frequent.
Continue transmission?
Displayed in case the number of
transmission is extremely large
within the specified duration when
using i- ppli. Select Yes to use
α
i- ppli successively, No to continue
α
i- ppli after terminating i-
α α
transmission or Terminate i-
quit i- ppli.
α
●Dial callout restricted.
This prohibited operation is
unavailable with Keypad Dial Lock
on.
●Download failed.
Communication was interrupted
during reception. Please move to
another location with good radio
reception and retry. However, in
case the data contains an error,
it cannot be downloaded even
though you retry. Contact the
provider of the data.
●Error in image.
Does not work correctly.
Flash movie cannot be displayed
because of the error in the image
data.
●Exceeded number of
maximum characters.
Failed to quote partly.
SMS message exceeded 70
characters (160 characters for the
font type of English) for reply, so
some characters cannot be quoted.
●Exceeds maximum size.
Unable to display.
ppli The contents of the attached file
α
ppli to beyond the maximum size cannot be
displayed.
●Exceeds maximum size.
Unable to play.
The attached file beyond the
maximum size cannot be played.
●Failed to clear call cost
information.
The UIM is not correctly installed or
the card is faulty. ☛P32
●Failed to move.
When moving selected items or all
items of the data, all data cannot be
moved.
●Failed to read call cost
information.
The UIM is not correctly installed or
the card is faulty. ☛P32
●Failed to save./Unable to
save.
･
Cannot be saved due to an error.
･
Failed to save because PDF data
is too large, etc.
●Failed to view message data.
ppli ･
When deleting or searching mail,
ppli to
α
the object mail data cannot be
referenced because it is used for
another processing. Retry later.
･
Mail data cannot be referenced in
chat mail. Retry later.
●File contains multiple data
file. Unable to display.
The contents of the attached file
containing multiple data cannot be
displayed.
●Folder is full.
Unable to receive Message R/F
because the memory space is
insufficient. Please read unread
Message R/F, release protection of
Message R/F or delete unnecessary
Message R/F.
●Frame number of this page is
not supported.
Cannot display because the number
of frames is too many.
In the multi-windows mode, it may
be displayed when closing the open
windows.
●i- ppli stand-by display
α
canceled due to security
error.
i- ppli standby display has exited
α
due to unpermitted operation.
●Inbox full. Unable to retrieve
new messages.
Unable to receive SMS because of
insufficient storage space in the Inbox
of FOMA terminal or UIM. Please read
unread mail, release mail protection or
delete unnecessary mail.
●Inbox full. Unable to retrieve
new messages.
Unable to receive all SMS messages
because there is insufficient storage
space in the Inbox of FOMA terminal
or the UIM. Please read unread mail,
release mail protection or delete
unnecessary mail and execute
Check SMS again.
●Inbox is full.
Unable to receive i-mode Mail
because there is insufficient memory
space in the Inbox. Please read
unread i-mode Mail, release i-mode
Mail protection or delete
unnecessary i-mode Mail.
●Incoming message data
damaged. Restore default
settings?
The received data of chat mail
contains error. Select Yes to return to
the default setting. Select No to quit
chat mail without returning to the
default setting.
Appendix/Data Interchange/Troubleshooting 367
Next