NTT docomo FOMA D703i User Manual page 415

2 Enter any connection name
(APN)
先 設定
(Set dialup connection
(APN))
･
The following one-byte characters cannot be
entered:
￥ / : ＊ ? ! <> ｜"
･
For Caller ID Notification preferences, follow
the instructions given by your provider.
■
Advanced setting (TCP/IP setting):
詳細情報の設定
Click
display the IP
アドレス
ムサーバー
(Name server) setting screens.
･
When dialup information such as address is
required, register it based on the information
assigned by the provider, etc.
3 Set the dialup connection (APN)
By default, "mopera.ne.jp" is registered in cid1,
and "mopera.net" in cid3. Register a dialup
connection (APN) for cid 2 or 4 to 10.
a Click
追加
(Add)
(APN)
接続先
The
connection (APN)) screen appears.
b Set a dialup connection name (APN) of your
provider, etc., which supports the FOMA
packet communication and the connection
z
Click OK
procedure
The display returns to the
screen.
･
Only one-byte alphanumeric characters,
hyphens ( - ) and periods ( . ) can be entered
(APN).
接続先
for
･
This terminal supports only PPP connection,
so select PPP
接続
procedure). For the compatible connection
procedure, inquire your provider.
z
接続
Click
(Set detail info) to
ネー
(IP address) and
の追加
(Add dialup
(APN)
接続先 設定
接続方式
for (connection
Click OK
4
The display returns to the screen in Step 2. Dialup
connection (APN) set in Step 3 and the connection
procedure appear in
dialup connection (APN)).
5
Check the dialup connection name (APN) of
(APN)
接続先
6 Enter the user name in
パスワード
password in
･
Enter the user name and password assigned
by the provider, etc. correctly. Be careful about
the upper/lower case of each character.
･
すべてのユーザー
If you select
ユーザーの選択
logon to Windows can access the connection.
10
(APN)
接続先 の選択
の選択 次へ
and click
ユーザー名
and the
z
次へ
Click
使用可能
for
, all users that are allowed to
(Select
Next