NTT docomo FOMA D703i User Manual page 201

Receiving and handling i-mode Mail
Receiving i-mode Mail
･
The received i-mode Mail is saved in the Inbox
folder of Inbox. However, when the received mail
matches the criteria specified in Sort Criteria, it is
saved in the specified folder.
･
The maximum number of items that can be saved
☛P381
1
An i-mode mail is received
Receiving screen
Reception completed
Reception result screen
Press o while receiving to stop reception but
･
depending on the receiving condition, the mail
will be received.
1 z
2 Select a folder
･
When a melody is attached, it plays automatically.
Auto play can be turned off. ☛P219
Displaying the received mail ☛P205
･
･
Select a Message i-
corresponding i-
α
INFORMATION
The reception result screen is displayed for about 15
●
seconds if you do not press any key, or until the ring alert
stops if ring time is set to 15 seconds or longer in Mail
Alert. To return to the previous screen immediately,
press c.
Mail Auto Receive
Flashing
When reception is
completed, the reception
result screen is displayed,
the mail ring alert sounds
and the keys light/flash.
: Unread i-mode Mail
exists.
: Unread i-mode Mail
and SMS exist.
Reception result scrolls.
Number of received i-mode
Mail
When reception fails, "×"
is indicated after Mail. To
receive unreceived mail,
perform Check i-mode
Message.
z
Select a mail
ppli folder to start the
α
ppli.
If the data size of received mail (number of characters,
●
attachment file size) exceeds the limit (maximum number
of characters) set with Limit Mail Size in Options of iMenu,
the attachments cannot be received automatically. To
receive it, select the file name on the mail view screen.
When the memory is not enough, or the maximum number
●
of saved items is exceeded, the oldest received mail
except unread one is overwritten. Be sure to protect
received mail you want to keep. Note that the number of
read mails to be deleted increases especially when
receiving an attachment with large size, such as 2 Mbytes.
If the mail cannot be overwritten because storage is filled
●
with unread mail and protected mail, reception of i-mode
Mail is stopped. or
To receive new messages, display unread mail, change
unread mail to read, delete unnecessary mail or cancel
mail protection.
i-mode Mail may not be received automatically soon after
●
sending it. Perform Check i-mode Message.
Extremely large i-mode Mail may not be accepted by the
●
i-mode Center and be returned to the sender with an
error message.
When new i-mode Mail is delivered, the i-mode Mail and
●
Message R/F stored in the i-mode Center are also
received.
i-mode Mail received by FOMA terminal is saved in Inbox
●
and i-mode Mail in the i-mode Center is deleted.
FOMA terminal shows which of TO, CC and BCC is
●
specified for you when you receive a mail from a party
who can specify TO, CC and BCC. ☛P207
When i-mode Mail is received from a party with the
●
incoming mail settings made in the FOMA terminal
phonebook, the settings apply to the operation of the ring
alert, vibrator and/or the key. For details on checking with
the phonebook, see "Name displays". ☛P80
･
When multiple items of i-mode Mail or Message R/F
are received at the same time, the operation depends
on the conditions set for the last i-mode mail or
Message R/F received.
For each i-mode mail including the attachment, it can be
●
automatically received up to 100 Kbytes. The attachment
exceeding 100 Kbytes can be manually downloaded
from the i-mode Center. ☛P203
Incoming i-mode Mail is stored in the i-mode Center in
●
the following cases:
･
The power is off
･
During a videophone call
･
In Self Mode
･
When reception fails
･
While being out of service area
･
While receiving SMS
･
During infrared communication
･
When Receive Option Setting is on
･
While connecting to the Data Center
･
While Omakase Lock is on
･
While connecting to the FirstPass center
･
When the storage is filled with unread mail and
protected mail
is indicated on the screen.
Mail 199
Next