NTT docomo FOMA D703i User Manual page 192

If you send i-mode Mail including pictograms to other
●
mobile phone companies (au/SoftBank/Tu-Ka), it is
automatically converted to the similar pictograms
displayed at the receiver side.
･
Depending on the model or function of the receiver's
mobile phone, the pictograms may not be displayed
correctly.
･
If there is no corresponding pictograms displayed at
the receiver side, it is converted to characters or "
Depending on the settings of the receiver's terminal such
●
as the number of characters that can be displayed, the
font or its display size, face marks may not be displayed
correctly and their shapes and views may be different
from the original ones.
An error message for address unknown etc. may not be
●
received when mail is sent to addresses other than
DoCoMo.
When the memory is not enough or the maximum
●
number of saved items is exceeded, i-mode Mail cannot
be composed and sent. Delete unnecessary i-mode Mail
and/or SMS from Unsent messages. ☛P211
Adding receivers
You can send i-mode Mail to up to 5 addresses at
one time (Multi-address transmission).
･
There are 3 address types:
(CC) and (BCC).
: Used for usual addresses.
: Used when you want to inform the other
party of the content of the particular mail
sent to the TO address.
: Used when you want to inform the other
party as with CC, but the BCC-specified
address is not shown for the other party.
･
Mail with no address entered in the
cannot be sent.
1
Highlight the address field on the mail
composition screen
■
Adding CC and BCC:
a m7 on the mail composition
z
screen Select an input method
190 Mail
〓
".
Add Address
(TO),
field
z a
An address field is
added.
b Select CC or BCC
address
･
Also TO can be selected.
･
When you have added by selecting Mail
group, TO, CC and BCC are set as
registered for the mail group.
■ Changing TO, CC and BCC: Highlight an
z
address field
address type
■ Deleting the added address field: Highlight
an address field
･
Only the address in the field is deleted when
there is only one field.
2 Enter the address in the added field
Press p
INFORMATION
The mail address entered in the
●
field can be seen at the receiver side. However, it may
not be displayed depending on the terminal, device, or
mailing software.
When sending of mail to some addresses fails, an error
●
message is displayed. Pressing o may display a list of
mail addresses for which transmission failed.
」
Composing and sending Deco-mail
You can decorate the i-mode mail message by
changing the font size, font color, or background
color and inserting the shot still images.
Deco-mail picture or Deco-mail pictogram
(pictogram D) set by default can also be used to
compose Deco-mail.
･
The size of Deco-mail which can be sent is less
than 100 Kbytes, which is the total size of the mail
text and the images inserted in the text. In
addition, the files up to 10 items or 2 Mbytes can
be attached.
■ Examples of decoration
z
Enter a mail
m9 z
Select an
z m8 z
Select Yes
z
field and
Deco-mail
Font color/font size/word
alignment
Inserted lines
Blink
Tickers
Swing
Inserted images
Background color