Making calls/videophone calls
Making calls/videophone calls
1
Enter the phone number
n (voice call) or t (videophone call)
2
You will hear a dial tone. You can start talking when the call is answered.
Voice call
Talking screen
・
If the other party is busy, you will hear a busy signal. For a videophone call, the message Busy. or
Connection failed. appears on the screen. Press f to end the call and call again later. You can call
back quickly using Redial.
・
If the other party's mobile phone or PHS is turned off or is in an area where radio waves are hard to
reach, a guidance informs that the connection is unavailable.
・
Charging begins when Connected to videophone. appears.
・
The other party's voice comes out of the speaker during a videophone call (Speakerphone function).
・
The following operations are available during a voice call:
To display received calls: l
・
Press f when you finish the call
3
・
When calling general subscriber phones, always include the area code, even
from the same city.
・
Up to 80 digits can be entered. However, only 24 digits are displayed.
To correct the phone number: c
・
To return to the standby display: c (for over a second)
・
Videophone call
Connecting screen
To display redials: r
・
Talking screen
© Disney
To start the phonebook: p
・
Calls/Videophone Calls
45
Next