NTT docomo FOMA D703i User Manual page 235

List display
b-i
a
Software list screen
a
(in orange)
：Normal i- ppli
α
：i-
ppli DX
α
：Message i-
ppli
α
b
：i- ppli that can be set for the i-
α
standby display
：i- ppli being currently set for the i-
α
standby display
c
：i-
ppli with Auto Start on
α
d
(half gray and half orange):
Partially saved i-
：i-
ppli at stopped condition by IP
α
e
：i- ppli downloaded from SSL pages
α
f ：Protected i-
ppli
α
g
：i- ppli registered in One-key Shortcut
α
h
to :
i- ppli registered in Two-key Shortcut
α
i
：i- ppli that cannot be used because of
α
the UIM operation restriction
Each time you press t, the list display and
･
the thumbnail display are switched.
･
If thumbnail images cannot be obtained,
or appears.
Press o
4
･
When Confirm every session is set for NW
transmission of i- ppli to be started, a
α
confirmation screen is displayed asking
whether to connect.
･
If you select an i- ppli application partially
α
downloaded before, a confirmation screen
appears asking whether to download the
remaining data. Selecting Yes starts
downloading. When downloading the
remaining part has finished, you can start the
i- ppli. If the remaining data fails to be
α
downloaded, the partially saved i-
deleted.
Thumbnail display
i- ppli name at the
a α
cursor position
ppli
α
ppli
α
ppli
α
,
ppli may be
α
Quitting i- ppli
α
Quit i- ppli in the procedure specified for each.
α
･
You can also quit i-
α
selecting Yes.
INFORMATION
Partially saved i- ppli can only be deleted, protected and
● α
moved to another folder. Showing its detail information is
also possible.
i- ppli is interrupted in the following cases. When you
● α
quit the function being used and running, i-
resumed. To resume i- ppli without quitting the current
α
function, press b and select i-
may not be resumed by b depending on the function
running. Some i- ppli may not return to the state before
α
interruption when resumed.
･
When there is an incoming call (except when the
ringing time of Voice Mail Service and Call Forwarding
Service is set to 0 Sec.)
･
When the time set by Timer has passed
･
When the time set in the schedule alarm or alarm
clock has come
･
When you switch to another function
When you are outside the service area or the saved data
●
cannot be used, some i-
α
operate correctly.
Images used by i- ppli or the data you entered may be
● α
sent to the server via Internet automatically. Images used
by i- ppli are such as those shot with the camera
α
activated by the running i-
through the infrared communication function of the
i- ppli.
α
For some i- ppli, the IP (Information Provider) can
● α
access i- ppli saved in the mobile phone and directly
α
stop its use. This disables the i-
upgraded, or set for the standby display. You can only
delete it or view the detail information. To use again,
please contact the IP to release suspension of i-
For some i- ppli, the IP may send data to i-
● α
in the mobile phone.
When the IP requests to stop/restart i-
●
to i- ppli, FOMA terminal communicates and
α
this case, the communication charge is not required.
The i- ppli continues its operation even if you set Key
● α
Lock and the display indication disappears while i-
is operating.
The sound volume for i-
● α
ppli effect sound of Adjust Volume. However, sound
i- α
effect is unavailable for some i-
To i- ppli creators
● α
If i- ppli being created does not operate normally, "trace
α
display" may help. Pressing m334 on the
standby display displays the trace. Note that trace
information cannot be displayed if i-
record trace information is not saved.
To delete the trace information, press p and select
Yes.
ppli by pressing f and
ppli is
α
ppli. However, i- ppli
α α
ppli may not start or not
ppli and those obtained
α
ppli to be started,
α
ppli.
α
ppli saved
α
ppli or send data
α
blinks. In
ppli
α
ppli operation can be set by
ppli.
α
ppli created to
α
i- ppli 233
α