Changing Videophone Settings; Setting For Switching A Voice/Videophone Call - NTT docomo STYLE Series Instruction Manual

■ Setting lighting during a Videophone call
1
During a Videophone call, press
[Videophone]/[Lighting].
: In the Custom menu: Select [Settings]/[Disp/LED/Power
saver]/[Light/Power saver]/[Original Eco mode]/[Display
light time]/[Video-phone].
2
Select the setting/t.
Making your camera image a normal image
■
<Reverse on/off>
1
While sending a camera image, press C/[Change
send img]/[Self-portrait]/[Reverse on/off].
Normal image is displayed as it is seen, and Mirror image is seen
with its left and right reversed.
The other party sees the normal image regardless of the setting.

Changing Videophone settings

Redialing as a voice call automatically
<Redial voice call>
When a Videophone call is not connected, the call is automatically
switched to the voice call and made again.
If a Videophone communication is started, Redial voice call is not
performed.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Videophone set]/[Redial voice
[ON].
<Lighting>
C/
Notify switch mode
Setting for switching a voice/
Videophone call
This setting lets the other party know whether the FOMA
terminal can be switched between a voice call and a
Videophone.
When the Notify switch mode is set to "Deactivate", the other party
cannot switch the call.
The Notify switch mode cannot be changed during voice calls,
Videophone calls or outside the service area.
1
2
call]/
If a call is redialed as a voice call, the voice call charges are
incurred.
Note that Redial voice call may not work if a call is placed to an
ISDN synchronous 64K access point or an ISDN Videophone that
does not support the 3G-324M standard (nP. 48) (as of
November 2008), or if an invalid phone number is dialed by
mistake. In addition, charges may be incurred.
In the Custom menu, select [Settings]/[Phone
settings]/[Videophone set]/[Notify switch
mode].
Select the setting/t/[Yes].
: To check settings: Select [Check Indication].
71