NTT docomo FOMA D703i User Manual page 371

●New pattern definitions for
scanning function available.
Please update.
Auto-update of the pattern definition
was unsuccessful. Update the
pattern definition manually. ☛P379
●No content is available. (204)
Could not find data at the specified
site.
●No requested software.
The i- ppli specified by the mail and
α
external equipment is not stored in
your FOMA terminal.
●No response. (408)
Communication was disconnected
because there was no response
from i-mode sites or websites within
the specified time. Retry later.
●No signature set.
Please retry to operate after
registering the signature. ☛P216
●No space to attach signature.
･
The signature cannot be inserted
because of exceeding the
maximum characters.
･
The signature cannot be inserted
in SMS because it is decorated.
･
The signature cannot be inserted
when English is set for Font type in
SMS Setting. Change Font type to
Japanese. ☛P226
●No space to attach file.
Exceeds the maximum number of
files attachable to one mail.
●Not enough memory. Unable
to connect.
Cannot connect because the
memory is insufficient. Closing the
window opened already or
terminating other running functions
may make connecting available.
●No UIM, requested software
failed to start.
The i- ppli to be used together with
α
the UIM used when downloading it
from a site, etc. cannot be started.
Insert the same UIM as used when the
software was downloaded to use it.
●Now calling. Unable to
record movie.
When using the camera during a
call, it cannot be switched to video
shooting and voice recording. End
the call before switching to video
shooting and voice recording.
●Number of characters
exceeds limit.
i-mode Mail message exceeded
10,000 one-byte (5,000 two-byte)
characters for reply. Please send
after decreasing the number of
characters.
●Omakase Lock active.
Operations are disabled because
Omakase Lock (Remote Lock) is set.
You can answer incoming calls.
☛P131
●Out of service area.
Unable to execute because the
terminal is in a place where radio
waves do not reach or out of the
service area.
●Outgoing message data
damaged. Restore default
settings?
The sent data of chat mail contains
error. Select Yes to return to the
default setting. Select No to quit chat
mail without returning to the default
setting.
●Page is not found. (404)
Unable to find i-mode site, etc.
Make sure that the URL is correct.
●Password is not correct.
(401)
The user name or password entered
in the basic authentication screen of
i-mode sites or websites is incorrect.
Please try again.
●PIM lock.
This prohibited operation is
unavailable with PIM Lock on.
●Please wait.
The voice line/packet
communication equipment is
damaged or the voice line network/
packet communication network is so
congested. Please try again later.
●Please wait for a while
(packet)
The packet communication
equipment is damaged or the packet
communication network is so
congested. Please try again later.
●PUK blocked.
Inquire at DoCoMo Shops.
●Receiving data exceeds
maximum size for i-motion
Reception was suspended because
the data exceeded the maximum
size when downloading streaming
type i-motion data.
●Receiving data exceeds
replayable size for i-motion
Reception or replay has not been
completed because the data size
exceeded the maximum size when
downloading normal type i-motion
data or when playback was
performed while downloading data.
●Receiving messages. Retry
later.
i-channel cannot be activated during
receiving mail or Message R/F.
Retry after receiving.
●Receiving messages stopped.
Some messages unreceived.
Unable to receive all SMS messages
because an error occurred during
reception. Please move to another
location with good radio reception and
execute Check SMS again. ☛P226
●Registration is in progress.
(554)
User registration with i-mode is in
process. Please try again later.
●Remotely Controllable
services denied.
Voice Mail Service and Call Forwarding
Service has not subscribed yet. It is
required to subscribe to Voice Mail
Service or Call Forwarding Service.
●Replay period has not yet
started.
Unable to play because of the term
prior to the playback period specified.
Please try again after the playback
period has started.
●Requested software
unavailable.
The i- ppli cannot be started
α
because of an error in i-
Starting specified i-
function from a site, mail or an external
device is disabled if there is a
problem in i-
α
or start-up conditions.
●Root certificate has expired.
Connect?
The term of validity of CA certificate is
premature or overdue. Select Yes to
connect or No not to connect. ☛P177
This message may be displayed
when the date and time have not
been set or are incorrect. Set the date
and time correctly. ☛P41
●Root certificate is not valid.
The certificate in FOMA terminal is
invalid. To establish a connection,
change the setting. ☛P177
Appendix/Data Interchange/Troubleshooting
ppli.
α
ppli by i- ppli To
α α
ppli operation settings
369
Next