NTT docomo FOMA D703i User Manual page 298

Press f to stop the alarm
2
･
Also the alarm stops when a minute has
passed without any operation or any key or
button other than f or the keylock switch is
pressed.
Alarm indication while another function is
being used
Function
During a call A warning tone sounds. The keys
do not flash and the vibrator does
not vibrate.
On-hold The above operation takes place
after the end of the on-hold state.
During data The alarm is issued after the end
transfer* 1 , while a of the left-mentioned operation.
･
call is ringing or If the schedule data is received via
being dialed, data communication, the schedule
received or does not operate when the
terminated scheduled date and times comes.
*1 Receiving/sending by packet communication is excluded.
Ringing the alarm clock at the set time
Setting the alarm clock time and sound
･
When Alarm Clock is on, the default settings are
as follows; Time: 00:00, Repeat: None, Snooze: ON
Alarm sound: Terminal setting, Volume: Terminal
setting, Vibrate alert: Terminal setting, Lighting:
Terminal setting, Lighting pattern: Terminal setting.
･
Up to 9 alarms can be set.
Default not set
m73 z
1
･
is displayed on left of a title while setting
an alarm.
■
Canceling: Highlight a title from the alarm
z m
clock list
･
To set the canceled alarm again: Highlight a
title from the alarm clock list
2 Select each item to set
Time：
Enter the time to set an alarm.
296 Other Convenient Functions
Alarm indication
Alarm Clock
1 to 9
z m
Repeat：
Select the repeat setting.
･
If None is set, the alarm is activated only
once.
･
If Every day is set, the alarm is activated
everyday.
･
If you select Day of week, select Day/Week
to select the days of the week and press
p.
Title：
Up to 14 one-byte or 7 two-byte characters
can be entered.
Snooze：
･
When Snooze operation is set to ON, the
snooze operation repeats 1-minute ringing
and 4-minute interval until an alarm clock
is stopped for 30 minutes.
& to switch to Set sound screen
3
Select and set each item
Alarm sound：
Set the alarm clock sound to be issued at the
specified time.
･
When i-motion, Melody, or Music is
selected, set the alarm clock sound.
Setting music data ☛P102
･
･
Playing and checking a melody or video/
i-motion when selecting ☛P102
･
If you select Terminal setting, the alarm
sound conforms to the setting of Alarm
Clock Sound.
Volume：
Set the volume.
･
For details of operation when Set is
selected ☛P62
･
If you select Terminal setting, the alarm
volume conforms to the setting for Alarm
clock sound of Adjust Volume.
& to switch to Set others screen
4
Select and set each item
Vibrate alert：
Set the vibration used at the set time.
･
If you select Select, select a vibrator
pattern.
･
If you select Terminal setting, the vibration
conforms to the setting of Vibrator Setting.
Lighting：
Set the whether to light the keys for the set
time.
･
If you select Terminal setting, the lighting
pattern conforms to the setting of Light
Alert Setting.
z
z