NTT docomo FOMA D703i User Manual page 75

Applying special effects to outgoing images
You can apply the following effects to outgoing images. This setting is available only while sending the camera
image.
Item Icon
Full auto
Adjust backlight
Spot photometry
Scenery
Night
For details ☛P153
･
Default Full auto
m21 during a call
1
Press any of 1 to 9
2
Adjusting the brightness/color density/flicker of outgoing images
You can adjust the brightness and color density in 5 levels. Also, you may be able to control the flicker of
images, if it occurs, by making settings according to the power supply frequency in your area.
･
This setting is available only while the camera image is being sent.
･
The brightness and color density may not be changed depending on the settings of Screen Mode/Effect.
･
This setting is retained even after the call is finished.
･
The flicker adjustment settings for the camera and Bar Code Reader will reflect changes in this setting.
☛P155, P157
Default Brightness: level 3 Density: level 3 Flicker adjustment: Auto
m2 during a call
1
■ Adjusting brightness and color density:
Adjusting flicker: 3
■
Item Icon
Twilight
Surf&Snow
Sport
Pet
Gourmet
Current effect applied
z
Select an item
a 2 z
Highlight Brightness slider
b d to highlight Density slider
･
The camera image is displayed on the main screen while adjusting.
･
If you do nothing on the terminal for some time after changing the
slider's position, the settings are not changed and the talking screen
reappears.
z 1 to 3
Item Icon
Letter
Whiten
Suntan
Soft touch
Mono tone (red)
z &
z & z p
Scene Mode/Effect
Item Icon
Mono tone (green)
Mono tone (blue)
Monochrome
Sepia
Camera Setting
Calls/Videophone Calls 73